Anycubic 3D Printer Error Code E5: How to Fix It

Q: What causes Anycubic error code E5?

Error code E5 is caused by auto-leveling probe failure, which can result from damaged probe hardware, loose wiring connections, debris blocking the sensor, or incorrect probe sensitivity settings.

Q: Can I still print with error code E5?

While you may be able to print by disabling auto-leveling and manually leveling the bed, it's recommended to fix the probe issue for optimal print quality and bed adhesion.

Q: How do I know if my auto-leveling probe is working?

A working probe will trigger consistently when brought near the bed surface, often indicated by an LED light or audible click. You can test this through the printer's manual probe test function.

Q: Is the auto-leveling probe covered under warranty?

Most Anycubic 3D printers include warranty coverage for the auto-leveling probe, typically for 12 months from purchase date. Check your warranty documentation before purchasing replacement parts.

Q: How often should I clean the auto-leveling probe?

Clean the probe monthly or whenever you notice inconsistent bed leveling performance. Regular maintenance prevents debris buildup that can cause false readings or complete probe failure.

Abstract

Error code E5 on your Anycubic 3D printer indicates an auto-leveling probe failure, meaning the printer cannot properly detect the bed surface for automatic bed leveling. This error typically occurs when the probe is damaged, disconnected, or not responding correctly to the printer's commands.