Asko Dishwasher Error Code F16: How to Fix It

Q: What causes Asko dishwasher error F16?

Error F16 is caused by excessive foam detected during the wash cycle. This usually happens from using too much detergent, using the wrong type of soap (like hand dish soap), or detergent buildup in the dispenser.

Q: Can I use regular dish soap in my Asko dishwasher?

No, never use regular dish soap, hand soap, or laundry detergent in your dishwasher. These create excessive suds that trigger the F16 error. Only use detergents specifically designed for automatic dishwashers.

Q: How much detergent should I use in my Asko dishwasher?

Follow the detergent manufacturer's instructions based on your water hardness and soil level. Generally, use 1-2 tablespoons of powder or 1 pod for normal loads. Use less for soft water and lightly soiled dishes.

Q: Will the F16 error clear itself?

The F16 error will not clear automatically. You must manually remove the excess foam, run rinse cycles to flush the system, and reset the dishwasher to clear the error code.

Q: How do I prevent Asko dishwasher F16 error from happening again?

Prevent F16 errors by using only dishwasher-specific detergent, measuring the correct amount, cleaning the detergent dispenser regularly, and avoiding pre-rinsing dishes with hand soap.

Abstract

Asko dishwasher error code F16 indicates a foam alarm - your dishwasher has detected excessive foam during the wash cycle. This typically happens when too much detergent is used or the wrong type of soap is added, causing the machine to stop the cycle for safety reasons.