Usually, Lexmark fuser error appears once the device fails to confront the standby temperature within the provided time. This is quite annoying error and most of the Lexmark users often face.
Paper jamming is the principal cause behind this error. Being a Lexmark printer user, encountering such issues is quite common.
However, this article will help you rid this error in the best way. In the following section, you will get to know some of the hassle-free solutions by which you can resolve this matter.
Simple Hacks to Resolve Lexmark Service Fuser Error
Here, in this section, we are going to mention some of the most reliable methods that can resolve this Lexmark error.
Solution 1: Restart the Lexmark Printer
You often find that your Lexmark printer gets heated up and declines to function correctly. So, as a result, the Lexmark printer fuser error appears.
In such situations, you need to reboot the printer. In some cases, some elements might generate heat and that’s why you should inspect inside the printer.
If any paper or anything else is stuck inside of it, then remove them carefully and reboot your printer. Afterward, check whether the error gets eliminated or not.
Solution 2: Review of Power Source
Over time, the issue with the power source can also trigger such a Lexmark printer error. The power cable mustn’t be broken.
Therefore, you need to remove the power cable and properly review all the cables attached to the printer.
After that, reconnect the power cable and turn your printer on. Once your printer reboots, verify the status of the error. If the error still appears, then follow the next solution.
Solution 3: Reset the Fuser
In order to resolve the fuser error, you need to change the fuser and replace it with a new one. Primarily, check the internet connection on the fuser unit and eliminate the fusing assembly.
Thereafter, reset the fuser or change it with a new one. But, it is advised that you buy a genuine fuser from Lexmark.
Solution 4: Install the Updated Version of Printer Driver
An outdated version of the Lexmark printer driver always affects the printer to run properly and it is possible that the fuser error appears because of this reason.
You have to install the fresh version of the printer driver. To do so, follow the steps below:
Step 1: At first, turn on your device. Then press the Windows Home key and write “Control Panel”. Now, choose the top search result to open the Control Panel window.
Step 2: Once the Control Panel window opens, navigate to the “Hardware And Sound” section. Find Device Manager from the Windows menu and view all the hardware devices that are connected to the device.
Step 3: Next, locate the Printer button and right-click on it. After that, select the “Check For Updates” option.
Step 4: In the newly appeared window, select the automatic update option. This will automatically check whether the latest version is available for the Lexmark printer or not.
Step 5: If available, then it will download and install the updates. You only need to follow the on-screen instructions.
After the update, reboot the device and the Lexmark printer should no longer be affected by the error.
Solution 5: Clear up the Paper Jam
Over time, the jammed paper can also influence the Lexmark fuser error. Hence, you need to clear up the jammed paper as soon as possible.
To do so, take out all the loose sheets from the paper tray and then clear up the jammed paper gently. After finishing the process, inspect whether the issue still appears or not.
We hope, after following the above solutions, you are able to eradicate the Lexmark fuser error. We have tried to simplify all the procedures so that you can easily perform those tasks.
But, if you still have any trouble regarding this Lexmark error, then you can post your queries in the comment section below.
In case, even after performing the above methods, the fuser error still bothers you, then you can definitely go for experts’ help to avail better assistance.