Bosch Dishwasher Error Code E04: How to Fix It

Q: What does Bosch dishwasher error code E04 mean?

Bosch error code E04 indicates a flow meter fault, meaning the dishwasher's control board is not detecting proper water flow, often due to a blocked or faulty flow meter.

Q: How do I reset Bosch dishwasher error E04?

To reset, unplug the dishwasher for 1-2 minutes, then plug it back in. Press and hold the Start/Reset button for 3 seconds. Run a short cycle to see if the error clears.

Q: Can a clogged filter cause error E04 on Bosch dishwasher?

While a clogged filter can cause poor performance, it rarely triggers a flow meter fault. However, cleaning the filter and sump area is good maintenance and may help.

Q: Where is the flow meter on a Bosch dishwasher?

The flow meter is typically located near the water inlet valve, behind the lower kickplate or on the left side of the dishwasher. It is a small plastic housing with an impeller inside.

Q: How much does it cost to fix Bosch dishwasher error E04?

If you DIY, cost is around $20-$50 for a replacement flow meter or inlet valve. Professional repair can cost $150-$300, depending on labor and parts.

Abstract

Your Bosch dishwasher displays error code E04, which indicates a flow meter fault. This means the dishwasher is not detecting water flow correctly, often due to a blocked flow meter, faulty sensor, or control board issue. Follow the steps below to diagnose and fix the problem.