Carrier HVAC Error Code 15: How to Fix It

Medium 1-2 hours Medium Severity Verified June 2026
Error Code
15
Brand
Carrier
Product Type
hvac
Severity
Medium
DIY Difficulty
Medium
Estimated Fix Time
1-2 hours
Carrier error code 15 indicates a blower power failure. This means the furnace or air handler is not receiving power to the blower motor. It can be caused by a tripped circuit breaker, a faulty blower motor, or a control board issue.
Ad

Tools You'll Need

How to Fix Error Code 15

  1. Power Down the System

    Always turn off power to the unit before servicing to avoid electrical shock.
  2. Check Circuit Breaker and Disconnect Switch

  3. Inspect Blower Motor Connections

    Disconnect power before removing panels.
  4. Test the Blower Motor Capacitor

    Capacitors can store a charge. Discharge the capacitor safely before testing.
  5. Measure Voltage at Blower Motor

    Work carefully with live voltage. Re-energize only for testing and then power down again.
  6. Check Control Board for Error Codes

Parts You May Need

Blower motor capacitor
Check Price on Amazon
Blower motor assembly
Check Price on Amazon
Blower motor capacitor
Check Price on Amazon
Blower motor assembly
Check Price on Amazon
Blower motor capacitor
Check Price on Amazon
Blower motor assembly
Check Price on Amazon
Blower motor capacitor
Check Price on Amazon
Blower motor assembly
Check Price on Amazon
Ad

When to Call a Professional

If the circuit breaker is fine and the motor has voltage but still doesn't run, the control board or motor replacement may require a professional technician.

Frequently Asked Questions

Can I reset Carrier error code 15?
Yes, turn off power to the system for 30 seconds and then turn it back on. If the error persists, there is an underlying issue.
How much does it cost to fix Carrier error code 15?
DIY capacitor replacement can cost under $20. A professional blower motor replacement may cost $200-$500.
What causes blower power failure on Carrier?
Common causes include tripped breaker, faulty capacitor, bad blower motor, or a failed control board.