Chrysler Error Code P1295: How to Fix It

Q: What causes Chrysler P1295 error code?

P1295 is caused by a faulty throttle position sensor, damaged wiring between the TPS and engine control module, corroded electrical connectors, or rarely, a failed engine control module that's not providing the 5V reference signal.

Q: Can I drive with P1295 error code?

Driving with P1295 is not recommended as it can cause unpredictable throttle response, poor fuel economy, rough idling, and potential stalling. The vehicle may enter limp mode to prevent engine damage.

Q: How much does it cost to fix P1295?

Repair costs typically range from $50-150 for a new TPS sensor, $20-50 for connector repair, or $800-1200+ if the engine control module needs replacement. Labor costs vary by location and complexity.

Q: What is the 5V reference signal in P1295?

The 5V reference signal is a precise voltage supplied by the engine control module to power sensors like the TPS. This reference voltage allows the ECM to accurately read sensor position and calculate proper fuel and ignition timing.

Abstract

Chrysler error code P1295 indicates that the throttle position sensor (TPS) is not receiving the proper 5-volt reference signal from the engine control module. This critical error can cause poor engine performance, rough idling, and potential stalling issues that require immediate attention.