Eero Router LED Blinking Blue: How to Fix It

Q: How long should Eero blink blue during setup?

Eero should blink blue for 5-10 minutes during normal setup. If it's been blinking blue for more than 15 minutes without progressing, try restarting the setup process or performing a factory reset.

Q: Why won't my Eero app detect the blinking blue Eero?

Ensure Bluetooth and location services are enabled on your phone, you're within 6 feet of the Eero, and your phone isn't connected to another WiFi network during setup. Try force-closing and reopening the Eero app.

Q: Can I set up Eero without the mobile app?

No, Eero requires the mobile app for initial setup as it uses Bluetooth for the initial pairing process. There's no web-based setup interface for Eero devices.

Q: What if my Eero is stuck blinking blue after setup?

If Eero continues blinking blue after completing setup, it may not have a proper internet connection. Check your Ethernet cable connection to your modem and verify your internet service is working properly.

Abstract

When your Eero router shows a blinking blue light, it means the device is in setup mode and broadcasting a Bluetooth signal for initial configuration. This is normal behavior for a new or factory-reset Eero that needs to be connected to your network through the mobile app.