Elden Ring Network Error Code network-2: How to Fix It

Easy 15-45 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
network-2
Brand
Elden Ring
Product Type
game
Severity
Medium
DIY Difficulty
Easy
Estimated Fix Time
15-45 minutes
Elden Ring error code network-2 means the game failed to connect to or load multiplayer services, preventing you from summoning other players, being invaded, or using co-op features. This is typically caused by network configuration issues, firewall restrictions, server-side problems, or an unstable internet connection. The good news is that most cases can be resolved at home without any special hardware or technical expertise.
Ad

Tools You'll Need

How to Fix Error Code network-2

  1. Check Elden Ring Server Status

  2. Restart the Game and Your Platform

  3. Restart Your Router and Modem

    Do not skip the full 60-second wait — simply toggling power immediately often does not fully reset the device.

  4. Switch to a Wired (Ethernet) Connection

  5. Check and Configure NAT Type

    Be careful when changing router settings. Write down any original settings before making changes so you can revert if needed.

  6. Disable VPN or Proxy Services

  7. Allow Elden Ring Through Your Firewall (PC)

  8. Verify Game File Integrity (PC/Steam)

  9. Update Network Adapter Drivers and Game (PC)

  10. Use Google or Cloudflare DNS (Advanced)

Ad

When to Call a Professional

If you have tried all steps above and still cannot connect, contact your Internet Service Provider (ISP) — they can check for line issues, confirm your NAT type at the modem level, or provision a public IP address if you are behind carrier-grade NAT (CGNAT), which blocks multiplayer on many games. You can also contact Bandai Namco or FromSoftware support directly at support.bandainamcoent.com if the issue appears account-specific or you receive an account-related ban notice alongside the error.

Frequently Asked Questions

What does Elden Ring error code network-2 mean?
Error code network-2 means Elden Ring was unable to load or connect to its multiplayer services. This can happen due to server outages, a strict NAT type, firewall blocks, an unstable internet connection, or the use of a VPN.
Is Elden Ring error network-2 a ban?
No, error code network-2 is a general multiplayer connection failure and is not related to a ban. A ban in Elden Ring typically displays a different message. Network-2 is almost always caused by connectivity or configuration issues on your end, or temporary server problems.
How do I fix Elden Ring network-2 on PS5 or PS4?
On PlayStation, start by restarting the game and console, then run a network test under Settings > Network > Test Internet Connection. If your NAT type is Type 3 (Strict), log in to your router and enable UPnP or set up port forwarding for Elden Ring. Using a wired Ethernet connection instead of Wi-Fi also significantly improves stability.
Can a VPN cause Elden Ring network error network-2?
Yes. VPNs are one of the most common causes of Elden Ring multiplayer errors. They interfere with the authentication handshake that FromSoftware's servers use to verify your connection. Always disable your VPN before playing Elden Ring online.
Why does Elden Ring keep showing network-2 even with a good internet connection?
A fast internet connection does not guarantee multiplayer will work — the issue is usually NAT type, firewall rules, or router configuration rather than speed. Check that your NAT type is Open or Moderate, that Elden Ring is allowed through your firewall, and that you are not behind a double-NAT setup (two routers stacked). Also verify the game files are not corrupted using Steam's file verification tool.

Related Error Codes