Husqvarna Automower Error Code 30: How to Fix It

Q: What causes Husqvarna Automower Error Code 30?

Error Code 30 is caused by weak GSM cellular signal reaching the Connect module. This can be due to poor cellular coverage, physical obstructions, antenna problems, or interference from nearby electronic devices.

Q: Can my Automower still cut grass with Error 30?

Yes, your Automower can continue its normal cutting operations with Error 30. This error only affects the Connect module's ability to communicate with the app - it doesn't impact the mower's core lawn cutting functions.

Q: How do I check cellular signal strength for my Automower?

Use your smartphone in the same location as your mower and charging station. Check the signal bars or use a cellular signal strength app. If your phone shows weak signal, your Automower's Connect module will likely experience the same issue.

Q: Will moving my charging station fix Error Code 30?

Moving the charging station to a location with better cellular reception can resolve Error 30. Try relocating it to higher ground, away from buildings, or to a more open area where cellular signals are stronger.

Q: Do I need to replace the Connect module for Error 30?

Connect module replacement is rarely needed for Error 30. This error is usually caused by signal reception issues rather than hardware failure. Try all troubleshooting steps before considering module replacement.

Abstract

Error Code 30 on your Husqvarna Automower indicates a GSM communication fault, meaning the Connect module is receiving a weak cellular signal. This prevents your mower from communicating with the Automower Connect app and may limit remote monitoring capabilities.