LG Washer Error Code OFF: How to Fix It

Easy 5-10 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
OFF
Brand
LG
Product Type
washer
Severity
Medium
DIY Difficulty
Easy
Estimated Fix Time
5-10 minutes
The OFF error code on your LG washer simply means the cycle has ended or the machine is paused. It's not a malfunction—the washer has completed its wash cycle and turned off as expected. However, if the washer stopped unexpectedly before finishing, or if you need to cancel the end-of-cycle signal, this guide will help you reset or restart it.
Ad

Tools You'll Need

How to Fix Error Code OFF

  1. Press the Power Button to Restart

  2. Cancel the End-of-Cycle Display

  3. Perform a Hard Reset

    Unplug the washer before servicing to avoid electrical shock.

  4. Check for Drained Water and Unload

    Be prepared for water spillage when accessing the drain filter. Place towels around.

  5. Run a Diagnostic Test (if available)

    Do not interrupt the diagnostic test once started.
Ad

When to Call a Professional

If the washer frequently stops mid-cycle and shows 'OFF', or if the door remains locked and you cannot start any cycle after a hard reset, there may be a faulty control board or door lock assembly. In that case, contact a qualified appliance technician.

Frequently Asked Questions

What does the OFF error code mean on an LG washer?
The OFF error code simply means the washer cycle has ended or the machine is paused. It is not a malfunction; the washer has completed its program and is waiting for you to unload or start another cycle.
How do I clear the OFF error on my LG washer?
Press the Power button to turn the washer on, then turn the cycle selector knob to a different cycle (e.g., Rinse+Spin) and press Start/Pause to clear the display. If the OFF message persists, unplug the washer for 1 minute and plug it back in.
Why does my LG washer show OFF but the door is locked?
After a cycle ends, the door lock may remain engaged for a short time (up to 2-3 minutes) as the washer releases internal pressure. Wait a few minutes and try opening the door. If it stays locked, check if water remains in the drum; you may need to run a Drain/Spin cycle first.
Can I restart my LG washer if the cycle was interrupted?
Yes. If the cycle stopped due to an interruption (like a power outage), press Power to turn it on, then press Start/Pause. The washer should resume from where it left off. If not, select a new cycle.
Is the OFF error code serious on an LG washer?
No, it is not serious. It is an informational status indicating that the cycle is complete. No repair is needed unless the washer is behaving abnormally, such as stopping mid-cycle repeatedly.

Related Error Codes