Miele Washer Error Code F58: How to Fix It

Easy 15-30 minutes Low Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
F58
Brand
Miele
Product Type
appliance
Severity
Low
DIY Difficulty
Easy
Estimated Fix Time
15-30 minutes
Error code F58 means your Miele washer has detected too many suds (foam) in the drum. This usually happens when you use too much detergent or the wrong type of detergent. Don't worry – it's an easy fix that you can do without any tools.
Ad

How to Fix Error Code F58

  1. Cancel the current cycle and drain the water

    Make sure the washer is not actively spinning before opening the door.

  2. Open the door and remove laundry

    Laundry may be very wet and heavy; lift carefully.

  3. Clean the detergent dispenser drawer

  4. Run a rinse cycle with no detergent

  5. Check for detergent residue in the drum

  6. Restart your laundry with less detergent

    Never use regular detergent in a high-efficiency washer – it creates excess suds.
Ad

When to Call a Professional

If the error returns after following these steps, there may be a problem with the drain pump or suds sensor. Contact Miele service for diagnosis and repair.

Frequently Asked Questions

What does error code F58 mean on a Miele washer?
F58 indicates that the washer has detected too many suds (foam) inside the drum. This is usually caused by using too much detergent or the wrong type of detergent.
How do I clear the F58 error code on my Miele washer?
Cancel the cycle, drain the water, remove the laundry, and run a rinse cycle without detergent. This should clear the suds and the error code. If it persists, reduce detergent use and ensure you're using HE detergent.
Can I use regular detergent in my Miele washer?
Miele washers are high-efficiency (HE) machines. You must use HE detergent labeled with the HE symbol. Regular detergent creates too many suds and can trigger error F58.
How much detergent should I use in a Miele washer?
Use only the amount recommended by the detergent manufacturer – typically 1-2 tablespoons for HE detergents. Overfilling the dispenser is a common cause of error F58.
Do I need to call a technician for Miele error F58?
In most cases, you can fix F58 yourself by reducing suds. If the error persists after trying the steps above, the suds sensor or drain pump may be faulty, and you should call a Miele service technician.

Related Error Codes