Speed Queen Washer Error Code E07: How to Fix It

Q: Can I still use my Speed Queen washer with an E07 error code?

You may be able to run cold-water cycles if the machine allows it, but heated wash cycles will not function correctly. Running the machine repeatedly with an unresolved E07 code can put extra strain on the control board and heating circuit, so it is best to diagnose and fix the issue before heavy use.

Q: How much does it cost to fix a Speed Queen E07 error?

If the fix is a faulty NTC thermistor, parts typically cost between $10–$30 and the repair is straightforward. A replacement heating element generally runs $30–$80 in parts. If a control board replacement is needed, costs can rise to $150–$400 or more for the part alone. Professional labor typically adds $80–$150 per hour on top of parts costs.

Q: What causes the E07 error code on a Speed Queen washer?

The E07 error is caused by a water heater fault in the machine. The most common culprits are a burned-out heating element, a failed NTC temperature sensor (thermistor), loose or corroded wiring connections to the heating circuit, or in less common cases, a faulty control board that is not sending proper signals to the heater.

Q: How do I reset a Speed Queen washer after fixing the E07 error?

After completing your repair, unplug the washer for at least 5 minutes, then plug it back in. This clears the stored error code from the control board's memory. Run a short heated test cycle to confirm the E07 code does not return. Some Speed Queen models may also have a specific reset procedure outlined in the owner's manual — consult your model's documentation if a simple power cycle does not clear the code.

Q: Is the E07 error covered under Speed Queen's warranty?

Speed Queen offers industry-leading warranties that vary by model and purchase date — some residential models carry a 5-year warranty and commercial models may carry even longer coverage. If your machine is still within its warranty period, contact Speed Queen customer support or an authorized service dealer before attempting any DIY repair, as self-repair may void your warranty coverage.

Abstract

Error code E07 on a Speed Queen washer indicates a water heater fault, meaning the machine's internal heating element is not raising the water temperature as expected during a wash cycle. This can be caused by a failed heating element, a faulty temperature sensor (NTC thermistor), wiring issues, or a problem with the control board. The washer may still run, but heated wash cycles will not function properly, potentially leaving clothes less clean or causing the machine to pause mid-cycle.