Thermador Oven Error Code E111: How to Fix It

Medium 45-60 minutes High Severity Verified June 2026
Error Code
E111
Brand
Thermador
Product Type
oven
Severity
High
DIY Difficulty
Medium
Estimated Fix Time
45-60 minutes
Thermador oven error code E111 indicates an open circuit in the broil element, meaning the heating element isn't receiving power properly. This prevents the broil function from working and requires either cleaning connections or replacing the broil element to restore normal operation.
Ad

Tools You'll Need

How to Fix Error Code E111

  1. Safety First - Disconnect Power

    Always disconnect power before servicing electrical appliances to prevent shock or electrocution.
  2. Remove Oven Racks and Access Panel

  3. Inspect the Broil Element

  4. Test Element Continuity with Multimeter

  5. Clean or Tighten Connections

  6. Replace Broil Element if Faulty

    Support the element while disconnecting to prevent it from falling and damaging the oven interior.
  7. Reassemble and Test

Parts You May Need

Ad

When to Call a Professional

Call a qualified appliance technician if you're uncomfortable working with electrical connections, if the wiring harness appears damaged, or if the error persists after replacing the broil element. Also seek professional help if your oven is still under warranty.

Frequently Asked Questions

Can I still use my Thermador oven with error code E111?
You can use the bake function, but the broil feature will not work until the error is resolved. The oven may also display the error intermittently during operation.
How much does a Thermador broil element cost?
Replacement broil elements typically cost $80-150 depending on your specific Thermador oven model. Always verify the part number matches your oven before purchasing.
Why did my Thermador broil element fail?
Broil elements commonly fail due to normal wear from high-temperature cycles, power surges, or physical damage from oven cleaning chemicals. Most elements last 5-10 years with regular use.
Will error code E111 damage other oven components?
No, this error typically doesn't cause damage to other parts. However, continued use with loose connections could potentially affect the control board over time.