Toyota Error Code P1335: How to Fix It

Q: What happens if I drive with Toyota error code P1335?

Driving with P1335 can cause engine stalling, poor performance, and difficulty starting. The engine may run rough or shut off unexpectedly, which can be dangerous. It's recommended to have this issue diagnosed and repaired promptly.

Q: How much does it cost to fix Toyota P1335 error code?

Repair costs typically range from $100-$500 depending on the cause. A faulty CKP sensor replacement costs $50-$200, while wiring repairs may cost $100-$300. If the reluctor wheel is damaged, costs can reach $400-$800 due to labor requirements.

Q: Can I reset Toyota error code P1335 without fixing it?

While you can clear the code temporarily with an OBD2 scanner, it will return if the underlying problem isn't fixed. Simply clearing codes without addressing the root cause can lead to more serious engine damage and safety issues.

Q: What causes Toyota P1335 crankshaft position sensor problems?

Common causes include a failed CKP sensor, damaged wiring harness, corroded connections, incorrect sensor air gap, damaged reluctor wheel, or poor engine ground connections. Heat, vibration, and oil contamination are frequent contributing factors.

Q: How do I know if my Toyota CKP sensor is bad?

Symptoms include difficulty starting, engine stalling, rough idle, reduced power, and the check engine light. You can test the sensor with a multimeter to check resistance values, or have it diagnosed with professional scan tools that show real-time sensor data.

Abstract

Toyota error code P1335 indicates the Crankshaft Position (CKP) sensor circuit has no signal while the engine is running. This critical sensor tells the engine control module (ECM) the position and speed of the crankshaft, and without this signal, your Toyota may experience rough idling, poor performance, or even fail to start.