Volvo Error Code P0335: How to Fix It

Q: What causes Volvo P0335 error code?

P0335 is most commonly caused by a faulty crankshaft position sensor, damaged wiring, loose connections, oil contamination on the sensor, or metal debris interfering with the sensor signal.

Q: Can I drive my Volvo with P0335 code?

You should avoid driving with P0335 as it can cause sudden stalling, poor performance, or prevent the engine from starting. If the car runs, drive immediately to a repair facility for diagnosis.

Q: How much does it cost to fix Volvo P0335?

DIY repair costs $50-150 for a new sensor. Professional repair typically costs $200-400 including labor, depending on sensor accessibility and your Volvo model.

Q: How long does a crankshaft position sensor last in a Volvo?

Volvo crankshaft position sensors typically last 100,000-150,000 miles under normal conditions, but can fail earlier due to oil leaks, excessive heat, or electrical issues.

Q: Will P0335 clear itself on a Volvo?

P0335 will not clear itself - the underlying problem must be fixed first. The code may disappear temporarily but will return if the sensor or circuit problem persists.

Abstract

Volvo error code P0335 indicates a problem with the crankshaft position sensor circuit, which is critical for engine timing and ignition. This sensor tells your engine's computer the position and speed of the crankshaft, and when it fails, your car may not start, stall, or run poorly.