Volvo Land Rover Error Code P1124: How to Fix It
Medium 1-2 hours High Severity
Verified June 2026
- Error Code
- P1124
- Brand
- Volvo Land Rover
- Product Type
- automotive
- Severity
- High
- DIY Difficulty
- Medium
- Estimated Fix Time
- 1-2 hours
Ad
Tools You'll Need
- OBD2 scanner
- Digital multimeter
- Screwdriver set (Phillips/flathead)
- Cleaning solvent (electrical contact cleaner)
How to Fix Error Code P1124
-
Clear the Error Code and Test Drive
Ensure safe driving conditions; do not test on busy roads if the vehicle is exhibiting drivability issues. -
Inspect the Throttle Position Sensor Wiring
Disconnect the battery negative terminal before working on electrical components. -
Test the TPS Voltage with a Multimeter
-
Replace the Throttle Position Sensor
Do not overtighten screws as the sensor housing is plastic and can crack. -
Recalibrate the TPS (if applicable)
-
Clear the Code and Verify Repair
Parts You May Need
Throttle Position Sensor (TPS)
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
Throttle Position Sensor (TPS)
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
Throttle Position Sensor (TPS)
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
Throttle Position Sensor (TPS)
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
Throttle Position Sensor (TPS)
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
Ad
When to Call a Professional
If you have replaced the TPS and properly checked wiring but the code persists, there may be an ECM issue or a deeper throttle body fault. Consult a professional mechanic or dealership for further diagnosis.Frequently Asked Questions
Can I drive my Volvo/Land Rover with error code P1124?
It is not recommended. Driving with a faulty TPS can cause stalling, poor acceleration, or unresponsive throttle, which may lead to unsafe driving conditions. It's best to fix the issue promptly.
Is error code P1124 the same in all Volvo and Land Rover models?
Yes, the code P1124 generally means the same thing: throttle position sensor out of self-test range. However, diagnostic procedures and replacement parts may vary slightly between models. Always consult your vehicle's service manual for specific details.
How much does it cost to replace a throttle position sensor?
The part itself typically costs between $30 and $100, depending on the model. Labor costs at a shop range from $50 to $150. DIY replacement can save you the labor fee.
Can a bad TPS cause transmission problems?
Yes, a faulty TPS can affect transmission shift points because the ECM uses TPS data to determine shift timing. You may experience harsh or delayed shifts.
Do I need to reprogram the ECM after replacing the TPS?
In most cases, no. However, some models require a TPS recalibration (see Step 5). If you have an aftermarket TPS, programming may be necessary. Always check the service manual.