Frigidaire Washer Error Code E11: How to Fix It

Q: What does error code E11 mean on a Frigidaire washer?

E11 means the washer took too long to fill with water, typically exceeding 8-10 minutes. This is usually caused by low water pressure, a kinked hose, clogged inlet screens, or a faulty water inlet valve.

Q: How do I reset error code E11 on my Frigidaire washer?

Try unplugging the washer for 1-2 minutes, then plug it back in. This clears the error code. However, if the underlying issue isn't fixed, the error will return.

Q: Can low water pressure cause error E11?

Yes. If your home water pressure is below 20 psi, the washer may not fill fast enough, triggering E11. Check by turning both faucets fully open and observing the flow.

Q: Where is the water inlet valve on a Frigidaire washer?

The water inlet valve is located at the back of the washer, behind the panel where the hoses connect. You'll need to remove the back panel to access it for testing or replacement.

Q: How do I clean the inlet screens on a Frigidaire washer?

Turn off the water supply and unscrew the fill hoses from the back of the washer. Use a small brush or toothpick to gently remove debris from the mesh screens. Reattach hoses securely.

Abstract

Error code E11 on your Frigidaire washer indicates a fill timeout: the washer didn't fill with enough water within a set time (usually 8-10 minutes). This is often due to low water pressure, a kinked hose, a clogged inlet screen, or a faulty water inlet valve. Follow the steps below to diagnose and fix the issue.