Frigidaire Washer Error Code E13: How to Fix It

Q: What does error code E13 mean on a Frigidaire washer?

E13 indicates a water level mismatch – the washer detects that the water level does not match the expected level during the fill cycle. Common causes include clogged inlet screens, faulty water valves, or a defective pressure switch.

Q: Can I use my Frigidaire washer with error E13?

No, the washer will not operate until the error is resolved. Running it may cause incomplete cycles or potential water damage.

Q: How do I reset Frigidaire error code E13?

Unplug the washer for 1-2 minutes, then plug it back in. If the error returns, you need to fix the underlying issue.

Q: Is error E13 covered under warranty?

If your Frigidaire washer is still under warranty, contact Frigidaire or the retailer for service. DIY repairs may void the warranty.

Q: What parts might I need to fix error E13?

Common replacement parts include water inlet valves, pressure switch, and the pressure switch hose. Use genuine Frigidaire parts for best results.

Abstract

Error code E13 on your Frigidaire washer indicates a water level mismatch – the machine detects the water level is not as expected during the fill cycle. This typically points to issues with the water inlet valves, pressure switch, or clogged hoses. Let's troubleshoot step by step.