Canon Printer Error Code 1410: How to Fix It
Easy 10-30 minutes Medium Severity
Verified June 2026
- Error Code
- 1410
- Brand
- Canon
- Product Type
- printer
- Severity
- Medium
- DIY Difficulty
- Easy
- Estimated Fix Time
- 10-30 minutes
Ad
Tools You'll Need
- Lint-free cloth or cotton swabs
- Isopropyl alcohol (90% or higher) or distilled water
- Replacement Canon ink cartridges (if current ones are empty or damaged)
- Computer with internet access (for firmware/driver updates)
How to Fix Error Code 1410
-
Power Cycle the Printer
Always use the printer's power button to shut it down before unplugging. Unplugging mid-print can corrupt printer memory. -
Open the Cartridge Access Door and Inspect All Ink Tanks
Do not reach into the printer while the carriage is moving. Wait until it fully stops before touching any cartridges. -
Remove and Reseat Each Ink Cartridge
Do not touch the gold electrical contact pads on the bottom of the cartridge or inside the printer slot — oils from your skin can interfere with detection. -
Clean the Cartridge Electrical Contacts
Never use tap water — it can leave mineral deposits. Make sure contacts are completely dry before reinserting cartridges to avoid short circuits. -
Check for an Empty or Incompatible Ink Cartridge
Using refilled or non-genuine cartridges may void your warranty and can cause persistent detection errors. Use genuine Canon cartridges where possible. -
Update or Reinstall Printer Firmware and Drivers
Never interrupt a firmware update by unplugging the printer. A failed firmware update can brick the device. -
Reset the Printer to Factory Defaults
A factory reset will erase all custom settings including wireless configuration. Note your network settings before proceeding.
Parts You May Need
Canon ink cartridge set
Check Price on Amazon
Canon ink cartridge set
Check Price on Amazon
Canon ink cartridge set
Check Price on Amazon
Ad
When to Call a Professional
Contact Canon support or a printer repair technician if error 1410 persists after replacing all ink cartridges with brand-new genuine Canon cartridges and cleaning the contacts. This may indicate a failed ink detection sensor or damaged contact pins inside the printer carriage, both of which require internal hardware repair. Also seek professional help if the printer is still under warranty — attempting internal repairs yourself may void it. Canon's support line can be reached at 1-800-OK-CANON.Frequently Asked Questions
What does Canon error code 1410 mean?
Canon error code 1410 means the printer cannot detect that all ink tanks (cartridges) are properly installed. The printer requires every cartridge slot to be filled and recognized before it will operate, even for black-and-white printing.
Can I fix Canon error 1410 without buying new ink cartridges?
Yes, in many cases. Start by removing and firmly reseating all existing cartridges, and clean the gold contact pads with a lint-free cloth and isopropyl alcohol. If the cartridges are not empty and are seated correctly, this often resolves the error without any new purchases.
Why does my Canon printer show error 1410 after I installed new ink?
If the error appears after installing new cartridges, check that you removed all orange protective tape from the new cartridges before installing them — this tape covers the ink nozzle and contacts. Also ensure each cartridge clicked firmly into place and that you are using the correct cartridge model for your specific printer.
Can third-party or refilled ink cartridges cause Canon error 1410?
Yes. Non-genuine, refilled, or incompatible third-party cartridges are a common cause of error 1410 because they may have different chip profiles that Canon printers fail to recognize. Switching to genuine Canon cartridges is the most reliable solution if you suspect cartridge compatibility is the issue.
Does Canon error 1410 mean my printer is broken?
Not necessarily. Error 1410 is most often caused by a missing, improperly seated, or unrecognized cartridge — all of which are user-fixable. Printer hardware failure is rare and usually only the cause if the error persists after replacing all cartridges with new genuine Canon ink and cleaning the contacts thoroughly.