Canon Printer Error Code 4103: How to Fix It
Easy 15-30 minutes Medium Severity
Verified June 2026
- Error Code
- 4103
- Brand
- Canon
- Product Type
- printer
- Severity
- Medium
- DIY Difficulty
- Easy
- Estimated Fix Time
- 15-30 minutes
Ad
Tools You'll Need
- Computer with internet access
- Canon printer driver (downloaded from Canon's official website)
- Correct paper type and size for borderless printing
- Printer's user manual (for model-specific reset instructions)
How to Fix Error Code 4103
-
Cancel the Current Print Job
Do not turn off the printer mid-print-cycle as this can cause a paper jam or leave ink smeared inside the printer. -
Verify Your Paper Supports Borderless Printing
-
Check and Reload the Paper in the Tray
-
Match Paper Size Settings on Your Computer
-
Enable Borderless Printing in the Driver Settings
-
Update or Reinstall the Canon Printer Driver
Make sure to download drivers only from Canon's official website to avoid malware or incompatible software. -
Run Canon's Print and Scan Doctor or Diagnostic Tool
-
Perform a Printer Reset
A factory reset will erase custom network settings, saved paper configurations, and any custom preferences stored on the printer. Note these down before resetting.
Ad
When to Call a Professional
If you have completed all troubleshooting steps including driver reinstallation and a factory reset and error 4103 still appears on every borderless print attempt, the issue may be a hardware fault such as a damaged print head carriage, a faulty encoder strip, or an internal sensor malfunction. At this point, contact Canon Support directly at 1-800-OK-CANON or take the printer to an authorized Canon service center. If your printer is still under warranty, Canon may repair or replace it at no cost. Repair costs for out-of-warranty printers can sometimes exceed the cost of a new entry-level printer, so weigh the repair estimate against replacement options.Frequently Asked Questions
What does Canon error code 4103 mean?
Canon error code 4103 is a borderless printing error. It means the printer was unable to complete a borderless print job, usually because the paper loaded does not support borderless printing, the paper size in the driver settings does not match the paper in the tray, or there is a conflict in the print job configuration.
What paper sizes support borderless printing on Canon printers?
The most commonly supported sizes for Canon borderless printing are 4x6 inch (10x15 cm), 5x7 inch (13x18 cm), 8x10 inch (20x25 cm), and in some models, A4 and Letter sizes. However, supported sizes vary by printer model. Check your specific Canon model's manual or the Canon support website to confirm which sizes are compatible with borderless printing on your printer.
Can I fix Canon error 4103 without reinstalling the driver?
Yes, in many cases you can fix error 4103 simply by correcting the paper size and media type settings in the print dialog before sending the job, and ensuring the paper loaded in the tray matches those settings. Driver reinstallation is only necessary if the settings are correct but the error continues to appear, which may indicate a corrupted driver.
Why does my Canon printer keep showing error 4103 even with the right paper?
If you have the correct paper loaded and the settings appear to match but the error persists, the most likely causes are a corrupted or outdated printer driver, a stalled print queue with a conflicting job, or a need to reset the printer. Try canceling all print jobs, restarting the printer and computer, updating the driver, and if needed, performing a factory reset on the printer.
Does Canon error 4103 mean my printer is broken?
Not necessarily. Error 4103 is most often a software or settings issue rather than a hardware failure. The vast majority of users resolve it by adjusting paper size settings, reloading the correct paper, or updating the printer driver. Hardware failure is only a concern if the error persists after all software-based troubleshooting steps have been completed.