Frigidaire Dishwasher Error Code E52: How to Fix It

Q: What causes Frigidaire dishwasher error code E52?

Error code E52 is caused by a faulty drive motor tachometer that cannot provide speed feedback to the control board, loose wiring connections to the motor, a damaged wash motor assembly, or a defective control board motor drive circuit.

Q: Can I reset Frigidaire E52 error code myself?

Yes, try resetting by holding the Start/Cancel button for 3 seconds, then disconnecting power for 5 minutes before restoring. However, E52 usually indicates a hardware fault that requires component repair or replacement.

Q: How much does it cost to fix E52 error on Frigidaire dishwasher?

DIY repair costs range from $150-300 for a wash motor assembly or $200-400 for a control board. Professional repair typically costs $250-500 including labor, depending on which component needs replacement.

Q: Is Frigidaire E52 error dangerous to ignore?

While not immediately dangerous, ignoring E52 prevents the dishwasher from operating and could indicate electrical issues that might worsen over time. Address the error promptly to avoid potential damage to other components.

Q: How do I test if my Frigidaire dishwasher motor is bad?

Test motor tachometer resistance with a multimeter (should read 80-120 ohms), check for loose connections, inspect for physical damage or burning, and manually spin the motor to check for binding. Professional testing may be needed for complete motor evaluation.

Abstract

Frigidaire dishwasher error code E52 indicates a drive motor tachometer fault, meaning the control board isn't receiving proper feedback from the wash motor about its speed. This error prevents the dishwasher from operating and typically requires motor component inspection or replacement.