Frigidaire Washer Error Code E20: How to Fix It

Q: Can I reset Frigidaire washer error code E20?

Yes, unplug the washer for 1 minute, then plug it back in. If the drain issue is resolved, the code will clear. If not, the code will reappear after starting a cycle.

Q: Why does my Frigidaire washer keep saying E20?

The E20 error indicates a drain timeout, usually due to a clogged filter, kinked hose, or faulty pump. Even after clearing, the error can recur if the underlying issue isn't fully resolved.

Q: How do I clean the drain pump filter on a Frigidaire washer?

Locate the small access panel at the bottom front of the washer. Open it, place a pan underneath, unscrew the filter cap, and pull out the filter. Clean it thoroughly and reinstall.

Q: Is error code E20 serious?

It's moderate. It usually means a blockage, which is easy to fix. However, ignoring it can lead to water damage or pump failure.

Q: How much does it cost to fix Frigidaire washer error E20?

DIY costs are $0 if just cleaning. If a new drain pump is needed, the part costs $30-$80. Professional service can range from $100-$200.

Abstract

Error code E20 on your Frigidaire washer means the machine is taking too long to drain water. This usually happens when the drain hose, pump filter, or pump itself is blocked. Follow these steps to clear the blockage and get your washer running again.