Frigidaire Washer Error Code E23: How to Fix It

Q: What does error code E23 mean on a Frigidaire washer?

Error E23 indicates an electrical fault in the drain pump circuit. It means the washer's control board detects a problem with the pump motor's electrical connection or operation.

Q: Can I reset the error E23 on my Frigidaire washer?

Unplug the washer for 5 minutes, then plug it back in. Run a drain/spin cycle to see if the error clears. If the error returns, a physical repair is needed.

Q: How much does it cost to fix Frigidaire washer error E23?

DIY cost: $20-$80 for a new drain pump (if needed) plus tools. Professional service can cost $150-$300 including labor and parts.

Q: Is it safe to continue using the washer with error E23?

No. The error means the drain pump is not working, so water won't drain, potentially causing leaks or damage. Stop use and repair immediately.

Q: Where is the drain pump located on a Frigidaire washer?

Typically behind the front kickplate or rear panel. Remove the bottom cover or back panel to access the pump near the drain hose.

Abstract

Error code E23 on your Frigidaire washer indicates an electrical problem with the drain pump circuit. This usually means the pump motor is not receiving power or has failed. Follow these steps to diagnose and fix the issue.