Frigidaire Washer Error Code E24: How to Fix It

Q: What does error code E24 mean on a Frigidaire washer?

Error code E24 indicates a tachometer fault in the drain pump. The machine isn't sensing the pump motor spinning properly, often due to a blockage, wiring issue, or failed pump.

Q: Can I reset the Frigidaire washer error code E24?

Yes, unplug the washer for 5 minutes and plug it back in. If the error was intermittent, it may clear. If it returns, the underlying issue must be fixed.

Q: How do I test the drain pump on a Frigidaire washer?

Access the pump, disconnect its wiring, and use a multimeter to check the tachometer coil (two smaller wires). A good reading is 100-500 ohms. Also check the main motor winding resistance if applicable.

Q: Is it safe to run the washer with error E24?

No. The washer may not drain properly, potentially causing water damage or overflows. Fix the error before using the machine.

Q: How much does it cost to fix Frigidaire washer error E24?

DIY cost ranges from $30-$80 for a drain pump assembly. Professional service including labor could cost $150-$300.

Abstract

Error code E24 on your Frigidaire washer indicates a tachometer fault in the drain pump. This means the machine isn't detecting proper rotation of the pump motor, often due to a stuck pump, wiring issue, or faulty pump assembly. Don't worry—most causes are fixable with basic tools.