Frigidaire Washer Error Code E31: How to Fix It

Q: What does error code E31 mean on a Frigidaire washer?

Error code E31 indicates a problem with the pressure sensor circuit. The pressure sensor monitors water level; a fault can prevent the washer from filling or spinning properly.

Q: Can I continue using my washer with error E31?

No. The washer may not fill correctly or could overflow. It's best to fix the issue before using the machine to avoid damage.

Q: How do I reset a Frigidaire washer error E31?

Unplug the washer for 1 minute, then plug it back in. If the error was temporary, it may clear. Otherwise, you need to fix the underlying cause.

Q: Is error E31 common on Frigidaire washers?

Yes, it's a known issue often caused by a clogged pressure hose or a faulty sensor. It's repairable with basic tools.

Q: How much does it cost to fix error E31?

DIY cost is around $20-$50 for a replacement pressure sensor. Professional repair can cost $100-$200 depending on labor rates.

Abstract

Error code E31 on your Frigidaire washer indicates a problem with the pressure sensor circuit. This sensor tells the control board how much water is in the tub. The error usually means the sensor is faulty, the wiring is damaged, or there's a blockage in the pressure hose. Follow these steps to diagnose and fix the issue safely.