Frigidaire Washer Error Code E35: How to Fix It

Q: What does error code E35 mean on a Frigidaire washer?

Error E35 indicates an overflow condition. The washer's water level sensor has detected too much water, so the machine halts to prevent flooding.

Q: How do I reset my Frigidaire washer after E35?

Unplug the washer for 1-2 minutes, then plug it back in. Run a rinse and spin cycle. If the error returns, there is an underlying issue.

Q: Can a clogged drain filter cause E35?

Yes, a clogged drain filter or drain hose can prevent water from draining properly, leading to overflow detection. Clean the drain pump filter regularly.

Q: How much does it cost to fix a Frigidaire washer overflow error?

DIY repair costs are typically $20–$50 for parts like inlet valves or pressure switch. Professional service can range from $150–$300 depending on the issue.

Q: Why does my Frigidaire washer keep filling with water?

This is often caused by a faulty water inlet valve that remains open even when the machine is off, or a defective pressure switch that fails to signal the control board to stop water flow.

Abstract

Error code E35 on your Frigidaire washer means the machine has detected an overflow condition, possibly due to a faulty water inlet valve, pressure switch, or clogged drain. This guide will help you diagnose and fix the issue safely.