Frigidaire Washer Error Code E47: How to Fix It
Medium 30-60 minutes Medium Severity
Verified June 2026
- Error Code
- E47
- Brand
- Frigidaire
- Product Type
- washer
- Severity
- Medium
- DIY Difficulty
- Medium
- Estimated Fix Time
- 30-60 minutes
Ad
Tools You'll Need
- Multimeter
- Phillips screwdriver
- Flashlight
- Damp cloth
How to Fix Error Code E47
-
Unplug the Washer and Let It Sit
Always unplug the washer before working on it to avoid electric shock. -
Check the Door Lock Assembly for Obstructions
-
Inspect the Door Lock Wiring
Take a photo of the wiring before disconnecting to ensure correct reconnection. -
Test the Door Lock Motor with a Multimeter
-
Replace the Door Lock Assembly
Ensure the replacement part matches your washer model (check the model number label inside the door).
Parts You May Need
Door lock assembly
Check Price on Amazon
Door lock assembly
Check Price on Amazon
Door lock assembly
Check Price on Amazon
Door lock assembly
Check Price on Amazon
Ad
When to Call a Professional
If you have tested the door lock motor and wiring and the error persists, or if you are uncomfortable working with electrical components, contact a qualified appliance technician.Frequently Asked Questions
What does error code E47 mean on a Frigidaire washer?
Error code E47 indicates a short circuit in the door lock motor. The washer cannot lock or unlock the door, so it won't start or finish a cycle.
Can I reset Frigidaire washer error code E47?
Yes, try unplugging the washer for 5-10 minutes to reset the control board. If the error was temporary, it may clear. If it returns, the door lock assembly likely needs replacement.
How much does it cost to fix Frigidaire washer error E47?
If you DIY, a replacement door lock assembly costs $20-$50. Professional repair can range from $100-$200 including labor and parts.
Do I need to replace the entire door lock?
In most cases, yes. The door lock motor is typically integrated into the lock assembly and cannot be replaced separately.
How do I test the door lock motor on a Frigidaire washer?
Use a multimeter set to ohms. Disconnect the door lock connector and probe the motor terminals. A reading near zero indicates a short; a reading of infinite indicates an open circuit. Both mean the motor is faulty.