Frigidaire Washer Error Code E57: How to Fix It

Medium 30-60 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
E57
Brand
Frigidaire
Product Type
washer
Severity
Medium
DIY Difficulty
Medium
Estimated Fix Time
30-60 minutes
Error code E57 on your Frigidaire washer indicates a motor control board fault. This means the main control board isn't communicating properly with the motor's control board. Most often, this is caused by a loose connection, a damaged wire harness, or a failed control board. Follow these steps to diagnose and fix the issue.
Ad

Tools You'll Need

How to Fix Error Code E57

  1. Unplug the Washer and Reset

    Always unplug the washer before performing any inspection or repair.

  2. Check Wire Connections at the Motor

  3. Inspect the Main Control Board Connections

    Be careful not to touch any exposed circuit board components to avoid static damage.

  4. Test the Motor with a Multimeter

    Only perform this test if you are comfortable using a multimeter.

  5. Replace the Motor Control Board

    Ensure the replacement board is compatible with your washer model.

Parts You May Need

Motor control board
Check Price on Amazon
Motor control board
Check Price on Amazon
Motor control board
Check Price on Amazon
Motor control board
Check Price on Amazon
Ad

When to Call a Professional

If you've completed these steps and the error persists, the main control board may be faulty or the motor itself may need replacement. These repairs require advanced diagnostic equipment and are best handled by a professional technician.

Frequently Asked Questions

Can I reset error code E57 on my Frigidaire washer?
Yes, try unplugging the washer for 5 minutes and then plugging it back in. This clears temporary faults. If the error returns, further diagnosis is needed.
How much does it cost to fix error code E57?
If you DIY, a motor control board costs about $50-$100. A professional service visit typically ranges from $150-$300 including parts and labor.
Is error code E57 covered under warranty?
Yes, if your washer is still under manufacturer warranty (usually 1 year), the repair should be covered. Contact Frigidaire or your retailer.
What causes error code E57 in Frigidaire washers?
The most common causes are loose wire connections, a failed motor control board, or a malfunctioning main control board.
Can I still use my washer with error code E57?
No, the washer will not run when this error is active. Continuing to use it may cause further damage.

Related Error Codes