Frigidaire Washer Error Code E68: How to Fix It

Q: What does error code E68 mean on a Frigidaire washer?

Error E68 means the control panel has detected a stuck key (button) that is being held down continuously. This can be caused by a physical obstruction, moisture, or a defective keypad or control board.

Q: How do I reset my Frigidaire washer after error E68?

Unplug the washer for 2-3 minutes to reset the control board. Plug it back in and see if the error is gone. Also try pressing each button a few times to unstick any keys.

Q: Can I fix a stuck button on my Frigidaire washer?

Yes, often you can fix it by cleaning the control panel with a damp cloth to remove sticky residue or debris. If a key physically sticks, you may need to replace the keypad or control board.

Q: Is error E68 serious?

Not usually serious, but it prevents the washer from operating. It's a medium severity error that can often be resolved by a simple reset or cleaning. If ignored, it may require a replacement part.

Q: How much does it cost to fix a Frigidaire washer error E68?

If DIY, cost can be $0 (reset/clean) or $30-$150 for a replacement keypad or control board. Professional repair may cost $100-$250 including service call and parts.

Abstract

Error code E68 on your Frigidaire washer indicates that a key on the control panel is stuck, meaning the washer thinks a button is being pressed continuously. This usually happens due to a stuck or faulty button, moisture, or debris under the keypad. Follow these steps to resolve the error.