Frigidaire Washer Error Code E82: How to Fix It

Medium 30-45 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
E82
Brand
Frigidaire
Product Type
washer
Severity
Medium
DIY Difficulty
Medium
Estimated Fix Time
30-45 minutes
Error code E82 on your Frigidaire washer indicates a cycle selector switch fault. This means the washer's control board is not receiving the correct signal from the cycle selector knob or button. Most often, this is due to a faulty switch, loose wiring, or a failed control board. The fix is moderately easy and can save you a service call.
Ad

Tools You'll Need

How to Fix Error Code E82

  1. Safety First – Unplug the Washer

    Always unplug the appliance before servicing.

  2. Access the Cycle Selector Switch

  3. Check Wiring Connections

  4. Test the Cycle Selector Switch

    Be careful not to damage surrounding components.

  5. Replace the Cycle Selector Switch

    Take a photo of the wiring before disconnecting to ensure correct reconnection.

  6. Test the Washer

Parts You May Need

Cycle selector switch
Check Price on Amazon
Cycle selector switch
Check Price on Amazon
Cycle selector switch
Check Price on Amazon
Cycle selector switch
Check Price on Amazon
Ad

When to Call a Professional

If replacing the cycle selector switch does not clear the error, the control board may be defective. At that point, it's best to call a qualified appliance technician, as diagnosing and replacing the control board requires advanced electrical knowledge.

Frequently Asked Questions

What does error code E82 mean on a Frigidaire washer?
Error code E82 indicates a cycle selector switch fault. The washer detects that the knob or button used to select cycles is not sending the correct signal.
Can I still use my Frigidaire washer with error E82?
No, the washer will likely not start or will stop mid-cycle. It's best to troubleshoot and fix the issue before using the washer again.
Is a cycle selector switch expensive to replace?
No, the switch itself costs around $20-$40. The repair is DIY-friendly and much cheaper than a service call.
Do I need any special tools to fix E82?
Yes, you'll need a Phillips screwdriver to remove the control panel and a multimeter to test the switch for continuity.
What if the cycle selector switch tests fine?
If the switch has continuity and wiring is secure, the problem may be the control board. A technician should diagnose it further.

Related Error Codes