Frigidaire Washer Error Code E92: How to Fix It

Q: What does error code E92 mean on a Frigidaire washer?

E92 indicates an EEPROM fault on the main control board. The board's memory has failed or is corrupted.

Q: Can I fix error E92 without replacing the control board?

Sometimes a hard reset (unplug for 5 minutes) or checking wire harness connections can fix it. But if the EEPROM is physically damaged, the board must be replaced.

Q: How much does it cost to replace a Frigidaire washer control board?

A replacement control board typically costs $50 to $150 depending on your model. Professional installation adds $100-$200.

Q: Will error code E92 cause other problems?

The washer will likely stop working and may not complete cycles. Continued use with this error could potentially damage other components.

Q: How do I find the right control board for my Frigidaire washer?

Locate your model number (usually on a sticker inside the door or on the back). Search for FSP (Factory Service Part) board matching that model number.

Abstract

Error code E92 on your Frigidaire washer indicates an EEPROM (Electrically Erasable Programmable Read-Only Memory) fault. This usually means the main control board has a memory error or has failed completely. The washer may stop mid-cycle, flash the error, and refuse to operate. This guide will help you troubleshoot and resolve the issue.