Frigidaire Washer Error Code E93: How to Fix It

Medium 30-60 minutes High Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
E93
Brand
Frigidaire
Product Type
washer
Severity
High
DIY Difficulty
Medium
Estimated Fix Time
30-60 minutes
Error code E93 on your Frigidaire washer indicates a firmware corruption issue with the main control board. This typically means the software that controls your washer's operations has become corrupted or failed to update properly. While this error can be serious, you can often resolve it with a simple reset or by re-flashing the firmware, avoiding a costly service call.
Ad

Tools You'll Need

How to Fix Error Code E93

  1. Unplug and Wait

    Unplug the appliance before performing any electrical checks to avoid shock hazard.

  2. Check for Error Code

  3. Perform a Forced Firmware Reset

    Do not press any other buttons during the reset sequence. If the washer powers off, it's normal.

  4. Check for Stuck Buttons

  5. Inspect Control Board for Damage

    Wear anti-static precautions to avoid damaging sensitive electronics. Only remove panels with the washer unplugged.

  6. Replace the Control Board

    Handle the new board by its edges and avoid touching circuitry. Ensure wire connections are secure.

Parts You May Need

Main control board
Check Price on Amazon
Main control board
Check Price on Amazon
Main control board
Check Price on Amazon
Main control board
Check Price on Amazon
Ad

When to Call a Professional

If you are uncomfortable working with electronics or if replacing the control board does not clear the code, call a qualified appliance technician. They can diagnose deeper wiring issues or program the new board with the exact firmware needed.

Frequently Asked Questions

Can I fix Frigidaire error E93 by unplugging the washer?
Yes, unplugging for 60 seconds often resolves temporary firmware glitches. If the error returns, further steps are needed.
How much does it cost to replace a Frigidaire washer control board?
A replacement control board typically costs between $80 and $200, plus labor if a technician installs it. DIY installation can save the labor fee.
What causes error E93 on a Frigidaire washer?
Error E93 is caused by corrupted firmware, often due to power surges, unstable voltage, or a failed control board component.
Does error E93 mean my washer is ruined?
No, it usually means the control board needs a reset or replacement. In most cases, the washer can be fixed without replacing the entire machine.
Can I update the firmware on my Frigidaire washer?
Most Frigidaire washers do not have user-updatable firmware. The control board must be replaced if a reset doesn't work.

Related Error Codes