Frigidaire Washer Error Code E95: How to Fix It

Easy 10-30 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
E95
Brand
Frigidaire
Product Type
washer
Severity
Medium
DIY Difficulty
Easy
Estimated Fix Time
10-30 minutes
Error code E95 on your Frigidaire washer means there's a 'mode mismatch' — the washer's control board isn't communicating correctly with the user interface or motors. This usually happens after a power surge, during a cycle change, or if a button is pressed too quickly. Don't worry; most fixes are simple and don't require a technician.
Ad

Tools You'll Need

How to Fix Error Code E95

  1. Unplug and Wait

    Always unplug the appliance before performing any electrical checks.

  2. Check for Stuck Buttons

  3. Perform a Factory Reset

    A factory reset may erase custom settings.

  4. Inspect the Control Board

    Discharge any residual electricity by touching a metal part of the chassis before handling electronic components.

  5. Replace the Control Board (if needed)

    Take photos of the wiring before disconnecting to ensure correct reconnection.

Parts You May Need

Main control board (user interface / main electronic control)
Check Price on Amazon
Main control board (user interface / main electronic control)
Check Price on Amazon
Main control board (user interface / main electronic control)
Check Price on Amazon
Main control board (user interface / main electronic control)
Check Price on Amazon
Ad

When to Call a Professional

If the error continues after a factory reset and visual inspection shows no damage, the control board may need professional diagnosis. Also, if you're uncomfortable disassembling the washer or working with electronics, call a technician.

Frequently Asked Questions

What does Frigidaire washer error code E95 mean?
E95 indicates a mode mismatch error. The control board detects that the washer's operating mode doesn't match what it expects, often due to a communication glitch or stuck button.
How do I reset a Frigidaire washer error code E95?
Unplug the washer for 5 minutes, plug it back in, and check if the error clears. If not, try pressing and holding the Start/Pause button for 5 seconds, or perform a factory reset per your manual.
Can a power surge cause error E95 on a Frigidaire washer?
Yes, power surges can disrupt the control board's communication, triggering a mode mismatch. A simple unplug-and-wait reset often fixes this.
Is error E95 a serious problem?
Not usually. Most fixes are simple resets or button cleaning. If the error returns frequently, the control board may have an issue that needs replacement.
What should I do if the error E95 appears during a cycle?
Pause the cycle and unplug the washer. Wait 5 minutes, plug it back in, and try a different cycle. If it persists, proceed with the factory reset or check for stuck buttons.

Related Error Codes