Frigidaire Washer Error Code EB3: How to Fix It

Q: Can I bypass error code EB3?

No, you should not bypass the error. EB3 indicates a low voltage condition that can damage the washer's components or cause improper operation. Fix the underlying voltage issue.

Q: Why does my Frigidaire washer show EB3 but the outlet voltage is fine?

If outlet voltage is normal, the problem may be internal, such as a loose wire connection, a faulty control board, or a malfunctioning voltage sensor on the board. Inspect connections and consider replacing the control board.

Q: Will a power surge cause EB3?

A power surge typically causes high voltage, not low. However, a surge can damage the control board, which may then incorrectly report low voltage. In that case, the control board may need replacement.

Q: How do I reset my Frigidaire washer after fixing EB3?

After resolving the low voltage issue, simply plug the washer in and run a rinse/spin cycle. The error code should clear automatically. If not, unplug the washer for 5 minutes to reset the control board.

Q: Is EB3 a common error?

EB3 is less common than other errors like E1 (water supply) or E5 (drain). It typically occurs in areas with unstable electrical supply or when the washer is on an overloaded circuit.

Abstract

Error code EB3 on your Frigidaire washer indicates that the incoming line voltage is too low (below 108V). This can prevent the washer from starting or operating properly. Common causes include a faulty power cord, a bad outlet, or an issue with the home's electrical supply.