Frigidaire Washer Error Code EF2: How to Fix It

Q: What does error code EF2 mean on a Frigidaire washer?

EF2 indicates a drain problem, most commonly a blocked or kinked drain hose, or a clogged drain pump filter. The washer is unable to expel water properly.

Q: How do I reset my Frigidaire washer after error EF2?

To reset, unplug the washer for 1 minute, then plug it back in. If the blockage is cleared, the error should disappear. If not, repeat the troubleshooting steps.

Q: Can I run my Frigidaire washer with error EF2?

No, the washer will not operate properly and may overflow or damage components if you try to run a cycle with a blocked drain.

Q: Where is the drain pump filter on a Frigidaire washer?

It’s located behind a small access door at the bottom front of the washer. You may need a screwdriver to open it.

Q: How often should I clean the drain pump filter?

It’s recommended to clean the filter every 2-3 months or whenever you notice slow draining. Regular cleaning prevents EF2 errors.

Abstract

Error code EF2 on your Frigidaire washer indicates a drainage problem – the washer's control board has detected that water is not draining properly, usually due to a blocked drain hose or pump. Don’t worry; this is a common issue you can often fix yourself without calling a repair technician.