Frigidaire Washer Error Code i10: How to Fix It

Q: What does error code i10 mean on a Frigidaire washer?

Error i10 means the washer detects no water entering the tub or water flow is insufficient. It's a water inlet fault.

Q: How do I reset Frigidaire washer error i10?

To reset, unplug the washer for 5 minutes, then plug back in. Also check that water supply is on and hoses are not kinked. If error returns, there is an underlying issue.

Q: Can low water pressure cause i10 error?

Yes, if home water pressure is below 20 psi, the washer may trigger i10. Ensure faucets are fully open and check your home's water pressure.

Q: Where is the water inlet valve on a Frigidaire washer?

It is located behind the back panel, usually at the top rear of the machine, where the hot and cold water hoses connect.

Q: What parts are needed to fix i10 error?

Common parts include a new water inlet valve or inlet screens. Occasionally a pressure switch or hose may need replacement.

Abstract

Error code i10 on your Frigidaire washer indicates a water inlet fault, meaning the machine is not filling properly or detecting water flow. This is often caused by a clogged inlet screen, faulty water inlet valve, or kinked hose. Follow these steps to diagnose and fix the issue.