Frigidaire Washer Error Code i20: How to Fix It

Q: What does error code i20 mean on a Frigidaire washer?

Error code i20 indicates a drain restriction – the washer cannot drain water within a set time. This is often due to a clogged drain hose, pump filter, or faulty drain pump.

Q: How do I reset a Frigidaire washer after error i20?

After clearing the drain restriction, plug the washer back in, select a drain/spin cycle, and press start. The error should clear. If not, unplug for 1 minute and then retry.

Q: Can a kinked drain hose cause error i20?

Yes, a kinked or crushed drain hose can restrict water flow and trigger the i20 error. Check the hose for bends and ensure it is properly positioned.

Q: Where is the drain pump filter on a Frigidaire washer?

The drain pump filter is usually behind a small access door at the front bottom of the washer. Open the door, unscrew the filter cap, and clean it.

Q: How much does it cost to replace a Frigidaire washer drain pump?

The drain pump part costs around $30-$70. If you hire a technician, labor may add $100-$200. DIY replacement is doable with basic tools.

Abstract

Error code i20 on your Frigidaire washer indicates a drain restriction – the machine can't expel water quickly enough. This is usually caused by a clog in the drain hose, pump filter, or drain pump. Follow these steps to clear the blockage and get your washer back to normal.