Jandy Pool Pump Error Code 2: How to Fix VFD Over Voltage

Q: What does error code 2 mean on a Jandy pool pump?

Error code 2 indicates a VFD (Variable Frequency Drive) over voltage condition, meaning the voltage supplied to the pump's drive is too high.

Q: Can I reset a Jandy pump error code 2 myself?

Yes, you can power cycle the pump (turn off breaker for 5 minutes) to reset. However, if the underlying voltage issue isn't fixed, the error will return.

Q: What voltage should a Jandy pool pump have?

Most Jandy pool pumps run on 230V or 115V. Check your pump's label. Voltage should be within ±10% of rated (e.g., 207-253V for 230V).

Q: Is a power surge protector required for a Jandy pool pump?

While not mandatory, a whole-home or dedicated surge protector is highly recommended to prevent VFD over voltage errors and protect electronics.

Q: How much does it cost to fix error code 2 on a Jandy pump?

DIY fixes (checking wiring, installing surge protector) cost under $100. Professional VFD replacement can cost $300-$800 depending on parts and labor.

Abstract

Error code 2 on a Jandy pool pump indicates a VFD (Variable Frequency Drive) over voltage condition. This means the voltage supplied to the pump's drive is too high or has spiked, potentially damaging the electronics. This guide will help you diagnose and fix common causes, such as power supply issues or faulty components.