Jandy Pool Pump Error Code 6: How to Fix Motor Lock

Q: What does error code 6 mean on a Jandy pool pump?

Error code 6 indicates a motor lock condition. The pump's motor has detected excessive resistance or inability to rotate, triggering a safety lockout to prevent damage.

Q: Can I fix Jandy pool pump error code 6 myself?

Yes, for common causes like debris in the impeller or a bad start capacitor. However, if the motor bearings are seized or windings damaged, professional service is recommended.

Q: How do I reset a Jandy pool pump after error code 6?

After fixing the underlying issue, turn off power to the pump for 5 minutes, then restore power. The pump should automatically reset and clear the error code.

Q: How much does it cost to fix a Jandy pool pump motor lock?

DIY repair costs typically $10-$50 for a new capacitor or cleaning supplies. Professional repair may cost $200-$600 depending on whether the motor needs replacement.

Q: What causes a Jandy pool pump to show error code 6?

Common causes include debris jamming the impeller, a failed start capacitor, seized motor bearings, or a defective motor winding. Lack of water flow can also trigger this error.

Abstract

Error code 6 on your Jandy pool pump indicates a motor lock condition, meaning the pump motor has detected excessive resistance or seized rotation. This safety feature prevents damage to the pump. Common causes include debris in the impeller, a seized motor bearing, or a faulty start capacitor.