Wyze Camera Error Code 70: How to Fix It

Easy 15-30 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
70
Brand
Wyze
Product Type
camera
Severity
Medium
DIY Difficulty
Easy
Estimated Fix Time
15-30 minutes
Wyze Camera Error Code 70 indicates that your Wyze Video Doorbell's indoor chime unit is not properly paired or has lost its connection to the doorbell camera. This typically happens after a power outage, router change, app update, or when setting up the doorbell for the first time. The good news is this is almost always a software or pairing issue you can resolve yourself through the Wyze app without any special tools.
Ad

Tools You'll Need

How to Fix Error Code 70

  1. Check the Wyze App and Firmware Version

  2. Power Cycle the Doorbell and Chime Unit

    Always turn off power at the breaker before touching any doorbell wiring. Doorbell transformers typically carry 16–24V AC, which can still cause a shock. Confirm power is off using a non-contact voltage tester before handling wires.

  3. Re-Pair the Chime via the Wyze App

  4. Verify Your Wi-Fi Network Connection

  5. Remove and Re-Add the Doorbell in the Wyze App

    Deleting the device will remove all saved settings and schedules for this doorbell. Take a screenshot of your current settings and notification schedules before deleting so you can easily restore them.

  6. Factory Reset the Doorbell as a Last Resort

    A factory reset will erase all device settings, pairing information, and local configurations. Only perform this step if all other solutions have failed.

Parts You May Need

Wyze Video Doorbell indoor chime unit
Check Price on Amazon
Wi-Fi range extender or mesh Wi-Fi node
Check Price on Amazon
Doorbell transformer
Check Price on Amazon
Wyze Video Doorbell indoor chime unit
Check Price on Amazon
Wi-Fi range extender or mesh Wi-Fi node
Check Price on Amazon
Doorbell transformer
Check Price on Amazon
Wyze Video Doorbell indoor chime unit
Check Price on Amazon
Wi-Fi range extender or mesh Wi-Fi node
Check Price on Amazon
Doorbell transformer
Check Price on Amazon
Ad

When to Call a Professional

Contact Wyze Support (support.wyze.com) if Error Code 70 persists after completing all steps including a factory reset and fresh setup. You may also need a licensed electrician if you suspect the doorbell transformer is faulty, the chime wiring is damaged, or the breaker for your doorbell circuit is malfunctioning. If the indoor chime unit itself appears physically damaged or fails to respond to the sync button, it may need to be replaced — contact Wyze Support to check if your device is still under warranty before purchasing a replacement.

Frequently Asked Questions

What does Wyze Error Code 70 mean?
Wyze Error Code 70 means that your Wyze Video Doorbell cannot communicate with or detect its paired indoor chime unit. This is a pairing or connectivity error, not a hardware failure, and is usually fixable through the Wyze app.
Why does my Wyze doorbell keep showing Error Code 70 after pairing?
If the error returns after pairing, the most common causes are a weak Wi-Fi signal dropping the connection, a router or network change that wasn't updated in the app, or outdated firmware on the doorbell. Make sure your doorbell firmware is up to date and that your Wi-Fi signal near the front door is strong.
Can I use my Wyze Video Doorbell without the indoor chime unit?
Yes, the Wyze Video Doorbell can operate without the indoor chime unit — you will still receive push notifications and see live video on the Wyze app when someone presses the button. However, you won't have an audible chime inside your home unless the chime unit is paired successfully.
Does a power outage cause Wyze Error Code 70?
Yes, power outages can disrupt the pairing between your Wyze Video Doorbell and its indoor chime unit. After power is restored, the devices sometimes fail to re-establish their connection automatically. Cycling the breaker and re-pairing through the Wyze app as described in the fix steps above will resolve this.
How do I reset the Wyze indoor chime unit?
To reset the Wyze indoor chime, unplug it from the wall outlet, wait 10 seconds, then plug it back in. If there is a small reset or sync button on the unit, press and hold it for 5 seconds until the LED indicator flashes. Then re-pair it through the Wyze app under your doorbell's Chime Settings.

Related Error Codes